The MB8G200 is a professioanl mid-bass woofer featuring very high output and dynamics.
The equipment, used a 22 coil, fiberglass former and copper inside / outside winding, has enable a very good transient peak response and has allowed good extension on mid-high frequencies. A specially designed M-roll surround guarantee a very low midrange distortion and perfect damping of the spurius resonances. Inverted dust cap for minimum cone break-up.
Features
- 2-inch, fiberglass former, copper voice coil
- 400W continuous program power handling
- 94 dB Sensitivity
- 60 Hz – 4 kHz Frequency range
- M-roll damped surround
Specifications
- Nominal Diameter: 200 / 8 mm/inch
- Rated Impedance: 8 Ω
- Program Power: 400 W AES
- Power handling capacity: 200 W AES
- Sensitivity: 94 dB
- Frequency Range: 60 Hz ÷ 4000 Hz
- Effective Piston Diameter: 165 / 6.5 mm/inch
- Max Excursion Before Damage (peak to peak): 30 / 1.2 mm/inch
- Minimum Impedance: 6.2 Ω
- Voice Coil Diameter: 51 / 2 mm/inch
- Voice Coil Material: Copper
- Voice Coil Winding Depth: 16 / 0.6 mm/inch
- Number of layers: 2
- Kind of layer: outside
- Top Plate Thickness: 8 / 0.3 mm/inch
- Cone Material: No pressed pulp
- Cone Design: Curved
- Surround Material: Polycotton
- Surround Design: M - roll
- Resonance frequency: 76 Hz
- DC resistance: 4.8Ω
- Mechanical factor: 3.7
- Electrical factor: 0.37
- Total factor: 0.33
- BL Factor: 12.5 T · m
- Effective Moving Mass: 25 g
- Equivalent Cas air load: 11 liters
- Effettive piston area: 0.021 m²
- Max. linear excursion (mathematical): 6.0 mm
- Voice - coil inductance @ 1kHz: 1.4 mH
- Half-space efficiency: 1.26%
- Overall Diameter: 239 / 9.4 mm/inch
- Bolt Circle Diameter: 221 / 8.7 mm/inch
- Bolt Hole Diameter: 6.5 / 0.3 mm/inch
- Front Mount Baffle Cut-out: 184 / 7.24 mm/inch
- Rear Mount Baffle Cut-out: 184 / 7.24 mm/inch
- Depth: 95 / 3.7 mm/inch
- Volume occupied by the driver: 0.8 / 0.03 liters/ft³
- Net Weight: 3.1 / 6.8 kg/lbs