Class-D powered three-way sound reinforcement speaker system. The Peavey PV 215D Two-Way Dual 15" Active Speaker is powered with Class-D technology, delivering 400 watts of sound and utilizing Peavey's DDT compression. It features dual 15" Pro 15 woofers and an RX14 titanium diaphragm dynamic compression driver mounted on a 60 by 40�° coverage horn. The PV 215D features a Class-D power section that provides up to 800 peak available watts of power for the system, with DDT compression. The balanced input is on a XLR/TRS combo jack, with a volume control and a Contour switch for boosting lows and highs. The PV 215D is capable of generating peak SPL up to 127 dB.
Features
- A great-sounding, versatile sound reinforcement enclosure!
- RX14 titanium diaphragm compression driver, with 1.4" titanium diaphragm
- Constant directivity tweeter horn
- Class-D powered system with up to 800 W total peak available power
- DDT compression/anti-clipping protection
- Signal input via combo female XLR/1/4", providing balanced operation
- Heavy-duty crossover network with high frequency driver protection
- Carpet covered trapezoidal enclosure with steel handles and protective corners
- Full-coverage heavy-duty perforated steel grill with powder coat finish
- T-Nut speaker mounting
- Peavey exclusive dual 15" heavy-duty woofers with 2-3/8" voice coil & 50 oz. magnet
- Contour switch provides bass and treble lift
- Peavey DDT Compression and Advanced Electronics
The amplifier is equipped with DDT compression, providing protection against excessive amplifier clipping and the consequent distortion. A Contour switch provides some bass and treble lift. A Link Out 1/4" jack provides an unpowered pre-level send for linking multiple units together, to be controlled by a single volume. Rugged ConstructionThe trapezoidal cabinet has steel handles on either side for portability and four rubber feet for floor use. It also allows for T-nut speaker mounting. Black steel corners and a full-length powder-coated perforated steel grille provide protection and a professional appearance. The rugged carpet-covered enclosure is constructed from MDF.
Specifications
- Transducer Type Dual 15" woofers with 2.375" voice coils and 50 oz magnets
- RX14 1.4" titanium diaphragm dynamic compression driver
- Constant Directivity 60 x 40�° horn
- Frequency Range: 40 Hz to 21 kHz, -10 dB (1 meter on-axis, swept-sine in 1/2 space environment)Frequency Response: 58 Hz to 17 kHz, �±3 dB (1 meter on-axis, swept-sine in 1/2 space environment
- Sensitivity: 98 dB (1W @ 1 m)Maximum SPL: 127 dB (peak)
- Coverage Angle: 60�° horizontal x 40�° vertical
- Crossover Frequency: 2.6 kHz
- Input Connections: 1 x XLR/TRS combo jack, balanced or unbalanced
- Output Connections: 1 x 1/4" TS - Link Out, unpowered for connection to another active speaker
- Output Power
- 800 watts peak400 watts continuous into 4Ω @ less than 1% distortionInput Impedances
- 2.7kΩ balanced (XLR or 1/4")1.35kΩ unbalanced (1/4")
- Filter Protection: 24 dB/octave roll-off, Infrasonic
- Frequency Response: 20 Hz to 20 kHz, +0 /-3 dBHum and Noise: > 90 dB below rated power
- Dynamic Range: > 14 dB, DDTTHD: < 0.5%, typically
- Damping Factor: > 200 @ 1000 Hz, 4Ω
- Power Requirements: 100 to 120VAC or 220 to 240VAC, 50/60 HzFuse For 100 to 120 VAC: International fuse classification T6.3AL. In the USA, types GDC, GMC, 215, 218, and 477 cartridge-style 5 x 20 mm size fuses with a 6.3 amp 250V rating can be used.For 220 to 240 VAC: International fuse classification T3.15AL. This is a cartridge style 5 x 20 mm size time-delay fuse with a 3.15 amp 250V rating.
- Enclosure Type: Trapezoidal, black carpet covered 12 mm MDF, black powder-coated full length perforated steel grille
- Mount Type: T-nut speaker mounting This unit is not designed for overhead suspension
- Dimensions (H x W x D): 48.5 x 18.88 x 14.75" (1,232 x 480 x 375 mm)
- Weight: 79 lb (35.9 kg)