Powered Mixer with Feedback Locating System!

The XR 8600D 1200W Powered Mixer with Digital Effects from Peavey offers high-quality audio and versatile features in a compact design. It has 8 mic inputs, each with its own low-noise preamp and 48V phantom power to support condenser microphones. There are also 10 line inputs so you can connect other audio devices. Each channel has a 3-band EQ, a monitor send, and a signal/clipping indicator. There is a 25dB pad on channels 1-6, and a mute switch on channels 1-8.

The mixer has a pair of internal power amplifiers that deliver 600W per channel for a strong, clear performance with minimal distortion. The mixer allows you to switch between dual main or main/monitor power amp modes for excellent versatility. There are dedicated 7-band main/monitor EQs with Peavey's Feedback Locating System (FLS) technology to shape your audio and reduce feedback. A DSP-based effects processor delivers 16 presets with parameter control so you can enhance your sound. DDT speaker protection with an activity LED protects your speakers from damage caused by hot signals or spikes.

Features

There are 8 mic inputs, each with its own low-noise preamp and 48V phantom power to support condenser microphones. There are also 10 line inputs so you can connect other audio devices
Each channel has a 3-band EQ, a monitor send, and a signal/clipping indicator. There is a 25dB pad on channels 1-6, and a mute switch on channels 1-8
A pair of internal power amplifiers deliver 600W per channel for a strong, clear performance with minimal distortion
The mixer allows you to switch between dual main or main/monitor power amp modes for excellent versatility
There are dedicated 7-band main/monitor EQs with Peavey's Feedback Locating System (FLS) technology to shape your audio and reduce feedback
A DSP-based effects processor delivers 16 presets with parameter control so you can enhance your sound
DDT speaker protection with an activity LED protects your speakers from damage caused by hot signals or spikes

Specifications

Input Impedance

Lo-Z Mic: 2k ohms
Line: 22k ohms
Tape: 20k ohms
Amplifier: 8.25k ohms

Input Gain

Lo-Z Mic: 50 dB max without pad, 25 dB max with pad
Line: 30 dB max without pad, 25 dB max with pad
Tape: 30 dB max

Input Level

Lo-Z Mic: -9 to -34 dBu min, -29 to -4 dBu nominal, -11 to +14 dBu max
Line: -27 to -2 dBu min, +2 to +27 dBu nominal, +21 to +26 dBu max
Tape: -26 dBu min, +4 dBu nominal, +21 dBu max

Inputs

Lo-Z Mic: XLR (pin 1 ground, pin 2 positive, pin 3 negative), balanced
Line: 1/4" TRS (tip positive, ring negative, sleeve ground), balanced
Tape: RCA, unbalanced

Output Impedance

Main: 600 ohms
Monitor: 600 ohms
Tape: 10k ohms

Output Level

Main: +4 dBu nominal, +21 dBu max
Monitor: +4 dBu nominal, +21 dBu max
Tape: -10 dBu nominal, +10 dBu max

Outputs

Main: 1/4" phono TS (tip positive, sleeve ground), unbalanced
Monitor: 1/4" phono TS (tip positive, sleeve ground), unbalanced
Tape: RCA, unbalanced

Gain

Mic In to Main Out: 60 dB (max gain)
Line In to Main Out: 30 dB (max gain)

Frequency Response

Mic In to Main Out: 20 Hz - 20 kHz (+0/-1 dB)
Line In to Main Out: 20 Hz - 20 kHz (+0/-1 dB)
To Power Amp Out: 40 Hz - 20 kHz (+0/-1 dB)
Amplifier: 20 Hz - 20 kHz +0/-10 dB @ rated power

Total Harmonic Distortion

Mic In to Main/Mon Out: < 0.01%
Line In to Main/Mon Out: < 0.01%
Typical: < 0.005%
Amp: < 0.01% @ rated output @ 1 kHz, < 0.5% for 6 dB overload, < 1% for 20 dB overload

Graphic EQ

Filter Frequencies: 80, 250, 500, 1k, 2k, 4, 10k
Max Boost and Cut: +12 dB boost, -12 dB cut

Hum and Noise

Main: -102 dB (all controls down), -90 dB (1 channel nominal, master nominal)
Monitor: -98 dB (1 channel nominal, master nominal), -90 dB (master nominal, channels nominal, mic inputs @ 150 ohms)
Amp: 95 dB below rated power level (500 W)

S/N Ratio: > 90dB below rated power output, mic/line to speaker out
EIN: -122 dBu (input terminated to 150 ohms)
Crosstalk

> 80 dB (adjacent input channels, 20 Hz - 20 kHz)
> 70 dB (left to right outputs, 20 Hz - 20 kHz)

CMRR

50 dB minimum (20 Hz - 20 kHz)
60 dB typical @ 1 kHz

Amplifier Power

1200 D module with DDT
600 W program into 4 ohms, both channels driven
500 W RMS into 4 ohms, both channels driven
360 W program into 8 ohms, both channels driven
300 W RMS into 8 ohms, both channels driven

Dynamic Range: > 26 dB
Damping Factor: > 100 @ 1 kHz, 4 ohms
Input Sensitivity: 2.5 VRMS for 500 W @ 4 ohms
Power Requirements

Dom: 120 VAC, 60 Hz, 275 W nominal
Exp: 220-240 VAC, 50/60 Hz, 275 W nominal

Dimensions (WxHxD): 21 x 11.75 x 12.38" (533 x 298 x 314 mm)
Weight: 23.8 lbs (10.8 kg)

Peavey 1808-4 SPS BWX RB Replacement Basket