With their proven track record, CKi amplifiers are designed for the most demanding contractor applications. With the ability to deliver audio, via CobraNet, and control on one CAT5 cable, the CKi series enables contractors and system designers to perform functions that other amplifier manufacturers simply cannot. By using Ethernet technology directly to the amplifier, the CKi series becomes an ultra scaleable system capable of economically powering anything from the smallest building to the largest theme park or stadium. FeaturesLegendary overbuilt power supply Rear-mounted attenuators with removable knobsEuro-style connection block, input and outputFront panel labeling areaSignal present, active, protect and ACL. LEDs (on front and rear of amplifier)PowerSave and sequential turn off (hardwired STO standard on all models)Fault I/O for connection to other monitoring systemsOptional input isolation transformers availableFive-year warrantyPowerSaveAll CKi amplifiers come standard with PowerSave circuitry.This effectively reduces currentdraw and thermal emissions to a minimum when the amplifier is at idle. PowerSave operates by cutting off the bias current to the output stage after absence of signal is sensed at the input.When signal presents itself, PowerSave instantly restores the bias current after the first positive-going waveform. Current draw specifications while PowerSave is active are included in specifications under "Idle Current Draw."
Specifications
Output Power, 70.7V: 800 Watts
Max RMS Output Voltage (each channel): 92 Volts
Peak Output Voltage (each channel): 130 Volts
Frequency Response (+0 / -0.3dB, 1W/70.7V): 10Hz-20kHz, -3dB @148kHz
Power Bandwidth (full power, 1% THD+N): 10Hz - 20kHz, +0/-0.2 dB
TourClass® Protection ACL, IGM, Auto
Ramp, short circuit, DC voltage, turnon/off transient, current inrush, sub/ultrasonic input.
THD+N (rated power, 1kHz): <0.1% @ 70.7V out
SMPTE IMD (rated power, 60Hz & 7kHz): <0.1% @ 70.7V out
Input CMRR (1kHz): >60 dBInput Sensitivity (rated power): 1.77V @ 70.7V out
Standard Voltage Gain X40 (jumper-selectable for X20 or .775V sens.)
Input Impedance (balanced/unbalanced) >20k Ohms / >10k Ohms
Hum and Noise ("A" weighted, rated power): -105 dB
Crosstalk ("A" weighted, rated power): >-60dB
Class: H
Input Connectors (per channel): Rear-panel barrier strip input, 4-pin Phoenix sequential turn-on/off connector on standard CC-STL module
Output Connectors (per channel): Rear-panel barrier strip output
Filter Storage: 37,000 μF
Power Supply (factory configured): 100V-240V, 50-60Hz
Idle Current Draw 120V: 1.3 A (PowerSave active)
1/8 Power Curr. Draw (typical music, 120V/70.7V): 8.0 A1/3 Power Curr. Draw (cont. music, 120V/70.7V): 17.0 AMax Curr. Draw (breaker rating, 120V/70.7V): 30.0 AThermal Emissions (1/8 Power, 70.7V): 2600 BTU/hrThermal Emissions (1/3 Power, 70.7V) 5000 BTU/hrCountry of manufacture: United StatesCooling: Variable speed, front panel mounted fan, front-to-side airflowControls: 3-position front panel On/Remote/Off switch, two rearpanel channel attenuators, AC mains circuit breakerIndicators: Signal, ACL (one per ch.) Protect, ActivePower connector: 30 amp twist lockConstruction: Steel chassis, 16 guage. Double thickness in rack ear areas.Dimensions: 89 mm x 483 mm x 435 mm (3.5" x 19" x 17.3)